1300 307 445
Work in Accordance with an Issued Permit Training (VOC Refresher MSMPER200) Online
Welcome to the Work in Accordance with an Issued Permit Verification of Competency (VOC) Training. This course will give you an understanding of people and roles which may be called 'permit recipients' or 'permit holders' by some organisations. Some organisations call 'permits' 'clearances'.
Features of this refresher training include:
- Download a VOC Certificate of Completion on successful completion
- A Digital Wallet ID VOC Card is also issued on successful completion (see John Citizen Sample)
- Verification of competency by our RTO partner, AlertForce RTO Code 91826.
Entry requirements:
1. You must upload 100 points of ID
2. You must upload a previously issued with a Statement of Attainment (or wallet card) by an RTO less than 3 years ago or be able to present a CV that demonstrates industry currency.
NOTE: this training is suitable as refresher if you have previously obtained a Unit of Competency in any of these qualifications:
- MSMPER200 Work in accordance with an issued permit,
- MSAPMPER200C Work in accordance with an issued permit, and / or
This training addresses the theoretical component of working in accordance with issued permits. It does not give you the practical skills required to enter a confined safely and as such is only applicable for refresher training not initial issue permits training.
All operations to which this course applies are subject to stringent Health, Safety & Environment (HSE) requirements, which may be imposed through State or Federal legislation, and these must not be compromised at any time.
Where there is an apparent conflict between performance criteria and HSE requirements, the HSE requirements take precedence.
This course will provide you with information about:
1 Introduction
2 Identify Regulatory And Workplace Requirements
3 Identifying The Need For A Permit
4 Collect Required Information
5 Apply For A Permit
6 Check Work Complies With Permit Type
7 Check Hazard Controls
8 Check That Preparations Have Been Completed
9 Sign Onto/Receive The Permit
10 Prepare Safe Working Conditions
11 Monitor Conditions And Hazards
12 Use Safety Equipment And Clothing
14 Inspect The Work Area
15 Comply With Permit Requirements
16 Display Permit
17 Comply With Scope, Location And Timeframes
18 Suspend Work Activities
19 Seek Authorised Extensions
20 Provide Status Report
21 Obtain Re-Validation Of Permit
22 Check Work Against Permit
23 Apply Housekeeping Requirements
24 Remove Lockout And Isolation Devices
25 Communicate Status Of Work
26 Effective Communication
27 Complete Documentation
This course has been reviewed by a recognised subject matter expert.
It has been designed to comply with best practice national health and safety standards. Terminology has been chosen for clarity and ease of comprehension across jurisdictions. For example, ‘employer’ has been used to signify the broader term ‘PCBU’, while ‘WHS’ represents both work and occupational health and safety.
ALTHOUGH BASED ON THE ELEMENTS, THIS IS NOT A NATIONALLY RECOGNISED COURSE. THIS VOC COURSE CAN ONLY TO BE USED FOR REFRESHER PURPOSES IF YOU HAVE PREVIOUSLY ACHIEVED A STATEMENT OF ATTAINMENT.
Note: Whilst a Statement of Attainments do not expire, different worksites have different policies and requirements of what refresher training should be and what is acceptable. Queensland sites, for example, typically want face to face only. You should check if you are unsure as there are no refunds available once you have downloaded certificates. This refresher course is a Verification of Competency undertaken by a Registered Training Organisation (RTO Code 91826).
If you have not previously done this course, to be deemed competent, you must complete an in-person training session an accredited trainer with a registered training organisation.
What are issued permits? Theoretical component of the competencies
This refresher course applies to persons who are required to conduct work activities under the authority of an issued permit to work and within the context and requirements of that permit. This typically applies to all work done by maintenance staff and contractors and also to any other non-process work performed on the plant.
- Regulatory framework
- Procedures
- Work permits
- Information required for permit
- Hazards
- Displaying issued permit
You are required to download the course materials and review. You will then be asked a series of questions to verify your competency as part of your assessment. They must be successfully completed to complete the course.
A Certificate of Completion is issued on successful completion of the course and you are required to get an 80% pass mark to be deemed as understanding the content. It is recommended that training is conducted every 2 years to stay refreshed.
SKU:
Couldn't load pickup availability
ADDITIONAL EXTRA BONUSES with OHS.com.au
Claim up to $1271.95 worth of Extra Bonuses
with every purchase
- Your personal copy of Safety Legends E-Book (value $39.95)
- $100 off your first case from Naked Wines (value $100)
- Upto 350,000 Bonus AMEX Frequent Flyer points* (value $1000)
- Complimentary Access to two online courses** (value $132)
$1271.95 EXTRA VALUE - JUST FOR YOU INSIDE!
* New customers when you successfully sign up for a new personal / business credit card ** Indigenous Cultural Awareness / Impacts of Climate Change coursesDescription
Welcome to the Work in Accordance with an Issued Permit Verification of Competency (VOC) Training. This course will give you an understanding of people and roles which may be called 'permit recipients' or 'permit holders' by some organisations. Some organisations call 'permits' 'clearances'.
Features of this refresher training include:
- Download a VOC Certificate of Completion on successful completion
- A Digital Wallet ID VOC Card is also issued on successful completion (see John Citizen Sample)
- Verification of competency by our RTO partner, AlertForce RTO Code 91826.
Entry requirements:
1. You must upload 100 points of ID
2. You must upload a previously issued with a Statement of Attainment (or wallet card) by an RTO less than 3 years ago or be able to present a CV that demonstrates industry currency.
NOTE: this training is suitable as refresher if you have previously obtained a Unit of Competency in any of these qualifications:
- MSMPER200 Work in accordance with an issued permit,
- MSAPMPER200C Work in accordance with an issued permit, and / or
This training addresses the theoretical component of working in accordance with issued permits. It does not give you the practical skills required to enter a confined safely and as such is only applicable for refresher training not initial issue permits training.
All operations to which this course applies are subject to stringent Health, Safety & Environment (HSE) requirements, which may be imposed through State or Federal legislation, and these must not be compromised at any time.
Where there is an apparent conflict between performance criteria and HSE requirements, the HSE requirements take precedence.
This course will provide you with information about:
1 Introduction
2 Identify Regulatory And Workplace Requirements
3 Identifying The Need For A Permit
4 Collect Required Information
5 Apply For A Permit
6 Check Work Complies With Permit Type
7 Check Hazard Controls
8 Check That Preparations Have Been Completed
9 Sign Onto/Receive The Permit
10 Prepare Safe Working Conditions
11 Monitor Conditions And Hazards
12 Use Safety Equipment And Clothing
14 Inspect The Work Area
15 Comply With Permit Requirements
16 Display Permit
17 Comply With Scope, Location And Timeframes
18 Suspend Work Activities
19 Seek Authorised Extensions
20 Provide Status Report
21 Obtain Re-Validation Of Permit
22 Check Work Against Permit
23 Apply Housekeeping Requirements
24 Remove Lockout And Isolation Devices
25 Communicate Status Of Work
26 Effective Communication
27 Complete Documentation
This course has been reviewed by a recognised subject matter expert.
It has been designed to comply with best practice national health and safety standards. Terminology has been chosen for clarity and ease of comprehension across jurisdictions. For example, ‘employer’ has been used to signify the broader term ‘PCBU’, while ‘WHS’ represents both work and occupational health and safety.
ALTHOUGH BASED ON THE ELEMENTS, THIS IS NOT A NATIONALLY RECOGNISED COURSE. THIS VOC COURSE CAN ONLY TO BE USED FOR REFRESHER PURPOSES IF YOU HAVE PREVIOUSLY ACHIEVED A STATEMENT OF ATTAINMENT.
Note: Whilst a Statement of Attainments do not expire, different worksites have different policies and requirements of what refresher training should be and what is acceptable. Queensland sites, for example, typically want face to face only. You should check if you are unsure as there are no refunds available once you have downloaded certificates. This refresher course is a Verification of Competency undertaken by a Registered Training Organisation (RTO Code 91826).
If you have not previously done this course, to be deemed competent, you must complete an in-person training session an accredited trainer with a registered training organisation.
What are issued permits? Theoretical component of the competencies
This refresher course applies to persons who are required to conduct work activities under the authority of an issued permit to work and within the context and requirements of that permit. This typically applies to all work done by maintenance staff and contractors and also to any other non-process work performed on the plant.
- Regulatory framework
- Procedures
- Work permits
- Information required for permit
- Hazards
- Displaying issued permit
You are required to download the course materials and review. You will then be asked a series of questions to verify your competency as part of your assessment. They must be successfully completed to complete the course.
A Certificate of Completion is issued on successful completion of the course and you are required to get an 80% pass mark to be deemed as understanding the content. It is recommended that training is conducted every 2 years to stay refreshed.
- Money Back Guarantee
- Save Time & Money
- Tax Deductible
- 1000's Trained Each Month
- Quality-Focused
- Peer Reviewed Courses
- Trusted Industry Partner
- Fast Certification
- 60 Day Guarantee
- *See refund policy
Got multiple people needing to do a course? We will get back to you within a day!
Student Reviews
Work in Accordance with an Issued Permit Training (VOC Refresher MSMPER200) Online
Work in Accordance with an Issued Permit Training (VOC Refresher MSMPER200) Online
Contact Us!
Contact form
ADDITIONAL EXTRA BONUSES with OHS.com.au
Claim up to $1271.95 worth of Extra Bonuses
with every purchase
- Your personal copy of Safety Legends E-Book (value $39.95)
- $100 off your first case from Naked Wines (value $100)
- Upto 350,000 Bonus AMEX Frequent Flyer points* (value $1000)
- Complimentary Access to two online courses** (value $132)
$1271.95 EXTRA VALUE - JUST FOR YOU INSIDE!
* New customers when you successfully sign up for a new personal / business credit card ** Indigenous Cultural Awareness / Impacts of Climate Change coursesDescription
Welcome to the Work in Accordance with an Issued Permit Verification of Competency (VOC) Training. This course will give you an understanding of people and roles which may be called 'permit recipients' or 'permit holders' by some organisations. Some organisations call 'permits' 'clearances'.
Features of this refresher training include:
- Download a VOC Certificate of Completion on successful completion
- A Digital Wallet ID VOC Card is also issued on successful completion (see John Citizen Sample)
- Verification of competency by our RTO partner, AlertForce RTO Code 91826.
Entry requirements:
1. You must upload 100 points of ID
2. You must upload a previously issued with a Statement of Attainment (or wallet card) by an RTO less than 3 years ago or be able to present a CV that demonstrates industry currency.
NOTE: this training is suitable as refresher if you have previously obtained a Unit of Competency in any of these qualifications:
- MSMPER200 Work in accordance with an issued permit,
- MSAPMPER200C Work in accordance with an issued permit, and / or
This training addresses the theoretical component of working in accordance with issued permits. It does not give you the practical skills required to enter a confined safely and as such is only applicable for refresher training not initial issue permits training.
All operations to which this course applies are subject to stringent Health, Safety & Environment (HSE) requirements, which may be imposed through State or Federal legislation, and these must not be compromised at any time.
Where there is an apparent conflict between performance criteria and HSE requirements, the HSE requirements take precedence.
This course will provide you with information about:
1 Introduction
2 Identify Regulatory And Workplace Requirements
3 Identifying The Need For A Permit
4 Collect Required Information
5 Apply For A Permit
6 Check Work Complies With Permit Type
7 Check Hazard Controls
8 Check That Preparations Have Been Completed
9 Sign Onto/Receive The Permit
10 Prepare Safe Working Conditions
11 Monitor Conditions And Hazards
12 Use Safety Equipment And Clothing
14 Inspect The Work Area
15 Comply With Permit Requirements
16 Display Permit
17 Comply With Scope, Location And Timeframes
18 Suspend Work Activities
19 Seek Authorised Extensions
20 Provide Status Report
21 Obtain Re-Validation Of Permit
22 Check Work Against Permit
23 Apply Housekeeping Requirements
24 Remove Lockout And Isolation Devices
25 Communicate Status Of Work
26 Effective Communication
27 Complete Documentation
This course has been reviewed by a recognised subject matter expert.
It has been designed to comply with best practice national health and safety standards. Terminology has been chosen for clarity and ease of comprehension across jurisdictions. For example, ‘employer’ has been used to signify the broader term ‘PCBU’, while ‘WHS’ represents both work and occupational health and safety.
ALTHOUGH BASED ON THE ELEMENTS, THIS IS NOT A NATIONALLY RECOGNISED COURSE. THIS VOC COURSE CAN ONLY TO BE USED FOR REFRESHER PURPOSES IF YOU HAVE PREVIOUSLY ACHIEVED A STATEMENT OF ATTAINMENT.
Note: Whilst a Statement of Attainments do not expire, different worksites have different policies and requirements of what refresher training should be and what is acceptable. Queensland sites, for example, typically want face to face only. You should check if you are unsure as there are no refunds available once you have downloaded certificates. This refresher course is a Verification of Competency undertaken by a Registered Training Organisation (RTO Code 91826).
If you have not previously done this course, to be deemed competent, you must complete an in-person training session an accredited trainer with a registered training organisation.
What are issued permits? Theoretical component of the competencies
This refresher course applies to persons who are required to conduct work activities under the authority of an issued permit to work and within the context and requirements of that permit. This typically applies to all work done by maintenance staff and contractors and also to any other non-process work performed on the plant.
- Regulatory framework
- Procedures
- Work permits
- Information required for permit
- Hazards
- Displaying issued permit
You are required to download the course materials and review. You will then be asked a series of questions to verify your competency as part of your assessment. They must be successfully completed to complete the course.
A Certificate of Completion is issued on successful completion of the course and you are required to get an 80% pass mark to be deemed as understanding the content. It is recommended that training is conducted every 2 years to stay refreshed.
- Money Back Guarantee
- Save Time & Money
- Tax Deductible
- 1000's Trained Each Month
- Quality-Focused
- Peer Reviewed Courses
- Trusted Industry Partner
- Fast Certification
- 60 Day Guarantee
- *See refund policy
Student Reviews
Work in Accordance with an Issued Permit Training (VOC Refresher MSMPER200) Online
Work in Accordance with an Issued Permit Training (VOC Refresher MSMPER200) Online
Couldn't load pickup availability
