Description

Welcome to TLILIC003 - Licence to Operate a Forklift Truck Training Course.

This course gives you the certification to apply for a LF High Risk Work Licence.

This unit specifies all the skills and knowledge necessary to operate a forklift safely, in accordance with any relevant legislation. The competence in this unit does not result in a HRWL license to operate this plant machinery.

Forklift truck is a powered industrial vehicle equipped with lifting media consisting of a mast, an elevating load carriage and a pair or fork arms. The attachments can be raised up to 900 mm above the ground. It does not include a pallet truck or a truck operated by a pedestrian.

Forklift truck High-Risk Work Licence is required for anyone performing this type of work.

This unit requires that a person driving a forklift truck:

1. Plan the work/task.
   
2. Prepare for the task/work.
   
3. perform work/task.
   
4. Pack up.

The OHS.com.au & Kallibr Training Advantage

• Quality training – our sites replicate real-world construction sites and our clients find that highly valuable.
• Convenience - we run an extensive public course schedule and can also do private courses at your worksite. 
• Experience - our trainers are from industry and have typically have decades of practical experience which is critical for high risk work environments

Where will the course be held in Sydney?

Training Provider: Kallibr Training (RTO 32365)

Location: Onsite training (Face to face)

Course length: 3 Days 

Certification / Accreditation: Nationally Recognised Statement of Attainment

Prerequisite: Nil but you will also need a white card to enter a work site

Kallibr Training is operating from Sydney's largest construction training centre.

It is a licenced, insured and accredited RTO (32365). All the instructors have completed their Certificate IV in Training and Assessment and are highly experienced, vocational trainers.

This fully equipped facility is designed to provide the highest quality training. The training facility is located in Ingleburn, offering a large array of equipment, structures and plant for construction, high-risk training, and access.

The Kallibr Training Centre is located at 3a Williamson Rd, Ingleburn NSW 2565

Background: Are You Up-To-Speed On The Intricacies of Forklift Truck Operation?

Forklift truck operators must be familiar with the nuances of their operation, given the important role they play in industrial settings.

There are many factors to consider before operating these powerful machines, from understanding the types of forklifts and safety procedures to maintenance protocols.

Basics of Forklift Trucks

Key Components and Their Functions

1. Mast: Used to raise and lower loads vertically.
   
2. Forks: To lift heavy materials, use a fork to support the weight.
   
3. Tires: They provide traction and stability which is essential for driving on different terrains.
   
4. Counterweight: Improves balance and prevents tumbling during lifting operations.
   

Advanced Forklift Operation techniques

Working in Confined Spaces

1. Precision and control are required to maneuver around tight corners and narrow aisles.
   
2. It is important to be aware of your surroundings and use the forklift’s turning radius.
   
3. Proper training and practice will help to reduce accidents and damage caused by forklifts and the environment.
   

Load Management & Stability:

1. Transport safety depends on the weight and distribution of the load.
   
2. Understanding the forklift’s load capacity and center of gravity is essential.
   
3. It is essential to monitor the stability of loads during transport, particularly in confined spaces.
   
4. Adjust forks and position of load to maintain balance and avoid accidents.
   
5. Using the correct load management techniques will ensure a safe and efficient operation.
   

What will you learn

1. Work orders or equivalent are used to identify the tasks and confirm them with the relevant people. Site inspections are conducted according to workplace procedures.
   
2. The work area operating surface is evaluated to determine if it is suitable for the operation of a forklift truck according to workplace procedures.
   
3. Consultation with the workplace person/s to ensure that workplan is clear, consistent with site requirements and in accordance with safety work procedures.
   
4. In accordance with the manufacturer's requirements and safe working procedures, we assess weather and work environment conditions to determine if they have any impact on the forklift truck operation.
   
5. Check that the risk control measures for hazards identified are implemented in accordance with safe working procedures.
   
6. Safe work procedures are followed to respond to unplanned and unsafe situations.
   
7. Loads will be picked up, transported, and placed using all forklift movements in accordance to safe work procedures.
   
8. The forklift truck must be parked, turned off and isolated in accordance with the manufacturer's requirements and safe working procedures.
   
9. The shutdown procedures for forklift trucks are performed in accordance with the manufacturer's requirements and safe working procedures.
   
10. The forklift truck is secured in order to prevent unauthorised use or access, according to safe work procedures.
    

Course outcomes

• Statement of Attainment Nationally Recognised
• Apply for an LF Licence
• Credit towards a full qualification.
• Continue your education and improve your career prospects with these strong pathways.

Entry requirements 

• Reached 18 years of age to sit the SafeWork NSW assessment.
• A general construction induction card (commonly known as a white card).
• Proof of your current residential address
• 100 points for identification for the SafeWork assessment.

• Students will need to have a basic understanding and knowledge of English.

HOW TO APPLY FOR YOUR NEW HIGH RISK LICENCE IN NSW

The application must be submitted within 60 days after the successful completion of the practical assessment. 

You can read the rules about applying for a High Risk Work Licence in NSW here.

• Complete your training and be deemed competent
• Complete your application for National Licence to Perform High Risk Work which will be given to you by the RTO and their approved SafeWork NSW Assessor
• You also need your Notice of Satisfactory Assessment (N5 form  again provided to you by the RTO approved assessor). This is the original orange and white copy.
• Provide list of 100 points of ID
• A photo (passport quality) with your details written on the back
• Previous licence if you have it
• Go to a participating Australia Post office and apply
• There are fees and charges applicable. See here 

You can call SafeWork NSW on 131050 if you have any further questions. Renewals can be done online providing it is not more than 12 months expired.