TLILIC0003 Licence to operate a forklift truck | OHS.com.au – ohs.com.au

TLILIC0003 Licence to operate a forklift truck (LF licence class) - Mitchell, Canberra

  • $750.00


Welcome to the Licence to operate a forklift truck (LF) - Nationally Recognised training & Assessment in Canberra. 

About this course

Training Provider: College of Warehousing (RTO 1623)

Location: Unit 2, 42-44 Essington St Mitchell ACT 2911

Course length: 2 days

Time: 8.30am - 4.30pm 

Top Facts about Licence to Operate a Forklift Truck in Canberra ACT

When you work in the warehouse, you’re operating heavy machinery on a daily basis. A forklift truck is one of the most important pieces of equipment that warehouse workers use to get their jobs done, and it can be dangerous if it’s not operated correctly. The Australian Capital Territory (ACT) requires any person who operates or controls a forklift truck on public property to have the appropriate licence, otherwise they face fines and other penalties.

There are a large number of risks and dangers for anybody working a forklift, even at a basic level. This course has been designed to give you an understanding of these risks and the system in place to help keep you safe. It also serves as the course that will enable you to obtain your forklift licence.

Before you can start work as a forklift operator, it’s mandatory that you get trained and receive your Statement of Attainment in TLILIC0003. The College of Warehousing course conducted face to face in Mitchell will enable you to do exactly that.

Features of this Nationally Recognised training include:

- Receive a Statement of Attainment on successful completion

- A Physical Wallet ID Card is also issued once all your documentation is verified and you’ve been deemed competent by the assessor (see 'John Citizen' sample)

- Training by our RTO partner, College of Warehousing RTO Code 1623 and a Licenced High Risk Work Assessor.

This training and assessment program addresses three components of the forklift class licence at the LF level (all based upon the unit of competency standard set out in TLILIC0003 or superseded equivalent). The 3 verifications of competency include:

A. Knowledge or theoretical component (tested online with a mixture of critical and non-critical questions)

B. Calculations component (tested online with all required to be answered correctly)

C. Performance component (practical with access to relevant workplace plant and equipment)

The assessment is based upon the intent of the Mandated National Assessment Instruments (NAI’s). However, it is important to note that this training & assessment does not give you the practical skills required to operate or apply for a High Risk Work Licence (HRWL) nor is it Nationally Recognised Statement of Attainment. This is to be used for VOC purposes only. To achieve initial accreditation or high risk licensing for the LF class, you must complete an in-person training session with an RTO and Trainer accredited to deliver TLILIC0003 training.

This course assesses the knowledge, calculations and performance components of TLILIC0003 Licence to operate a forklift truck (LF) and will provide you with information and assessment on:

      1. Plan for the work/task
      2. Prepare for the work/task
      3. Perform work/task
      4. Pack up

THIS IS A NATIONALLY RECOGNISED COURSE.

What is a sample of the areas covered during the course assessment?

          1. All work is confirmed to ensure coverage of work/task requirements for the relevant work area is in accordance with workplace procedures
          2. Forklift truck is selected using relevant methodology
          3. Work areas appropriately assessed
          4. Traffic Management plan in place
          5. Appropriate communication procedures are identified and tested
          6. Work in line with procedures
          7. Appropriate communication methods are identified with appropriate personnel.
          8. Check and inspect working area positioning in line with procedures
          9. Risk control measures put in place
          10. Forklift log book is inspected
          11. Pre-start checks put in place
          12. Prior to operation, forklift truck and safety equipment for working at height is visually checked for any damage with defects reported
          13. Weight and positioning of load on platform is assessed to ensure compliance
          14. Forklift truck path and load/s are monitored constantly when moving
          15. Check loads of forklift
          16. Unplanned and unsafe situations are responded to in accordance with safe work procedures
          17. Forklift truck is shut down in accordance with manufacturer specifications and safe work procedures
          18. Forklift truck is secured to prevent unauthorised access

 

Entry requirements:

  1. You must submit 100 points of ID to enrol eg. Drivers Licence and Medicare or Passport

NOTE: this training is suitable as the evidence required to obtain a Forklift Licence.

If your licence has expired, we recommend that if this is the case and you intend to remain working, you should renew your licence with your State Regulator before your time runs out.