Skip to product information
1 of 1
Regular price $66
Regular price Sale Sale price $66
Sale Sold out

Asbestos Awareness Training Course Online

This course focuses on highlighting the importance of managing Asbestos in the workplace. Asbestos is a hazardous material that poses a risk to health by inhalation if the asbestos fibres become airborne and people are exposed to these airborne fibres. Exposure to asbestos fibres is known to cause mesothelioma, asbestosis and lung cancer. It is important for employees who may work in buildings that contain asbestos to know where it is likely to be found and how to avoid exposure. 

Successful completion of this training course, participants will be enabled to:

- Identify relevant OHS/WHS legislation that applies to asbestos

- Identify asbestos

- Identify likely asbestos containing material

- Know the health effects of exposure to asbestos

- Establish and maintain safety procedures

- Identifying when a license Is required when removing asbestos

- Identifying the requirements for selection and use of relevant PPE

- Acquire knowledge and understanding of asbestos removal

- Safety requirements of working with asbestos

Other Asbestos Training courses available here

Asbestos-containing materials were used extensively in Australian buildings and structures, plant and equipment and in ships, trains and motor vehicles during the 1950s, 1960s and 1970s, and some uses, including some friction materials and gaskets, were only discontinued on 31 December 2003.

The well-known adverse health consequences of exposure to airborne asbestos fibres can be prevented if precautions are taken and appropriate procedures are followed. Strong management and control of all asbestos-containing materials (ACM) in the workplace is essential. The risks posed by asbestos vary depending on the nature and condition of the materials and the potential for exposure.

Do you agree that it is a good idea to reduce the risks associated with asbestos in the workplace? Good, let’s start by looking at when and where asbestos has been used in Australia.

What are the historical uses of asbestos?

Asbestos is the fibrous form of mineral silicates belonging to the serpentine and amphibole groups of rock-forming minerals.

The most common form of asbestos used in Australia is crocidolite (blue asbestos), and chrysotile (white asbestos). Crocidolite and chrysotile account for over 95% of asbestos based materials used in Australia. Other mineral forms of asbestos were not widely used.

As a naturally occurring mineral fibre, asbestos is mined and then broken down from mineral clumps into groups of loose fibres.

Asbestos has excellent fire resistance, insulation properties, fibre strength, durability and flexibility. As a result, it was used in more than 3,000 products, including heat-resistant textiles (cloth, padding and board), asbestos cement products (sheets and pipes), special filters for industrial chemicals, thermal insulation products (pipe and boiler insulation), friction materials (clutch plates, brake linings), gaskets, floor tiles, roofing materials, packing materials, paints and protective paper.

A major historical use was as sprayed thermal insulation on steel beams for fire protection. This sprayed or ‘limpet’ asbestos poses the greatest health risk, because of its highly friable nature.

Asbestos-containing materials (ACM) may still be encountered throughout public and private buildings and structures, especially those built between the 1950s and the late 1970s to early 1980s. Some uses of ACM continued until 2003, notably in friction materials (brakes) and gaskets.

What types of asbestos were produced and used in Australia?

Asbestos is the name applied to six naturally occurring minerals that are mined from the earth. The different types of asbestos are: 

Commonly used in Australia

Serpentine

  • Chrysotile 

Amphibole

  • Amosite
  • Crocidolite

Not commonly used in Australia

Actinolite

Anthophyllite      

Tremolite 


In Australia, mostly chrysotile asbestos was mined until 1939. With the commencement of mining at Wittenoom in Western Australia in 1937, crocidolite dominated production until the final closure of this mine in 1966. New South Wales, the first State to mine asbestos, produced the largest tonnages of chrysotile (until 1983), as well as smaller quantities of amphibole (until 1949).

Australian asbestos production and exports declined after the closure of the Wittenoom mine, and imports of chrysotile also started to decline. Consumption peaked in about 1975, at 70,000 tonnes/year.

Australia also imported many manufactured asbestos products, including asbestos cement articles, asbestos yarn, cord and fabric, asbestos joint and millboard, asbestos friction materials and gaskets. The main sources of these products were the United Kingdom, the USA, the Federal Republic of Germany and Japan.

In Australia, the asbestos cement manufacturing industry was responsible for over 60% of all production and 90% of all consumption of asbestos fibre. From about 1940 to the late 1960s all three types of asbestos were used in this industry. The use of crocidolite was gradually phased out from 1967, but amosite was used until the mid-1980s. Much of this industry output remains in service today in the form of ‘fibro’ houses and water and sewerage piping.

Between 1945 and 1954, 70,000 asbestos cement houses were built in New South Wales alone (52% of all the houses built in that State). In Australia as a whole, until the 1960s, 25% of all new housing was clad in asbestos cement. By 1954 Australia was number four in the Western world in gross consumption of asbestos cement products, after the USA, the UK and France, and clearly first on a per capita basis.

When did the national ban on the use of asbestos begin?

On 17 October 2001, the National Health and Safety Commission (NOHSC) declared a prohibition on all uses of chrysotile from 31 December 2003, subject to a very limited range of exemptions.

This prohibition also confirmed earlier prohibitions of the use of amosite and crocidolite asbestos.

Under the National Model Regulations for the Control of Workplace Hazardous Substances the chrysotile asbestos ban prohibits the use (i.e. manufacture, supply, storage, sale, use, re-use, installation and replacement) of chrysotile asbestos except for certain very limited scientific uses.

The prohibition does not extend to the removal of asbestos products in situ at the time prohibition took effect. These in situ asbestos containing materials (ACM) must be appropriately managed to ensure that the risks of exposure to airborne asbestos fibres are minimised.

The ultimate goal is for all workplaces to be free of ACM. Where practicable, consideration should be given to the removal of ACM during renovation, refurbishment, and maintenance, rather than other control measures such as enclosure, encapsulation or sealing. Asbestos products which were in situ on 31 December 2003 may only be replaced by products which do not contain asbestos.

Course run time 60 minutes.

This course has been reviewed by a subject matter expert.

It has been designed to comply with best practice national health and safety standards. Terminology has been chosen for clarity and ease of comprehension across jurisdictions. For example, ‘employer’ has been used to signify the broader term ‘PCBU’, while ‘WHS’ represents both work and occupational health and safety.

This training is not a substitute for professional legal advice. If you require further advice or information, please contact the health and safety regulator in your jurisdiction.

    A Certificate of Completion is issued on successful completion of the course and you are required to get an 80% pass mark to be deemed as understanding the content. It is recommended that training is conducted every 2 years to stay refreshed.

    For more information on Asbestos Awareness Training see AlertForce.

    Run time 60 minutes.

      SKU:P-8000

      2 reviews
      Title

      Course Highlights:

      • On-demand Training
      • Complete on Any Device
      • Quality Focused
      • Fast Certification
      • Tax Deductable
      • 100% Online
      • 24 Months Unlimited Course Access
      • Self-print Certificate

      FREE EXTRA BONUSES with OHS.com.au

      Claim up to $1232 worth of Extra Bonuses
      with every purchase

      • $100 off your first case from Naked Wines (value $100)
      • Upto 100,000 Bonus Qantas Frequent Flyer points* (value $1000)
      • Complimentary Access to two online courses** (value $132)
      $1232 EXTRA VALUE - JUST FOR YOU INSIDE!
      * New customers when you successfully sign up for a new personal / business credit card ** Indigenous Cultural Awareness / Impacts of Climate Change courses

      Description

      This course focuses on highlighting the importance of managing Asbestos in the workplace. Asbestos is a hazardous material that poses a risk to health by inhalation if the asbestos fibres become airborne and people are exposed to these airborne fibres. Exposure to asbestos fibres is known to cause mesothelioma, asbestosis and lung cancer. It is important for employees who may work in buildings that contain asbestos to know where it is likely to be found and how to avoid exposure. 

      Successful completion of this training course, participants will be enabled to:

      - Identify relevant OHS/WHS legislation that applies to asbestos

      - Identify asbestos

      - Identify likely asbestos containing material

      - Know the health effects of exposure to asbestos

      - Establish and maintain safety procedures

      - Identifying when a license Is required when removing asbestos

      - Identifying the requirements for selection and use of relevant PPE

      - Acquire knowledge and understanding of asbestos removal

      - Safety requirements of working with asbestos

      Other Asbestos Training courses available here

      Asbestos-containing materials were used extensively in Australian buildings and structures, plant and equipment and in ships, trains and motor vehicles during the 1950s, 1960s and 1970s, and some uses, including some friction materials and gaskets, were only discontinued on 31 December 2003.

      The well-known adverse health consequences of exposure to airborne asbestos fibres can be prevented if precautions are taken and appropriate procedures are followed. Strong management and control of all asbestos-containing materials (ACM) in the workplace is essential. The risks posed by asbestos vary depending on the nature and condition of the materials and the potential for exposure.

      Do you agree that it is a good idea to reduce the risks associated with asbestos in the workplace? Good, let’s start by looking at when and where asbestos has been used in Australia.

      What are the historical uses of asbestos?

      Asbestos is the fibrous form of mineral silicates belonging to the serpentine and amphibole groups of rock-forming minerals.

      The most common form of asbestos used in Australia is crocidolite (blue asbestos), and chrysotile (white asbestos). Crocidolite and chrysotile account for over 95% of asbestos based materials used in Australia. Other mineral forms of asbestos were not widely used.

      As a naturally occurring mineral fibre, asbestos is mined and then broken down from mineral clumps into groups of loose fibres.

      Asbestos has excellent fire resistance, insulation properties, fibre strength, durability and flexibility. As a result, it was used in more than 3,000 products, including heat-resistant textiles (cloth, padding and board), asbestos cement products (sheets and pipes), special filters for industrial chemicals, thermal insulation products (pipe and boiler insulation), friction materials (clutch plates, brake linings), gaskets, floor tiles, roofing materials, packing materials, paints and protective paper.

      A major historical use was as sprayed thermal insulation on steel beams for fire protection. This sprayed or ‘limpet’ asbestos poses the greatest health risk, because of its highly friable nature.

      Asbestos-containing materials (ACM) may still be encountered throughout public and private buildings and structures, especially those built between the 1950s and the late 1970s to early 1980s. Some uses of ACM continued until 2003, notably in friction materials (brakes) and gaskets.

      What types of asbestos were produced and used in Australia?

      Asbestos is the name applied to six naturally occurring minerals that are mined from the earth. The different types of asbestos are: 

      Commonly used in Australia

      Serpentine

      • Chrysotile 

      Amphibole

      • Amosite
      • Crocidolite

      Not commonly used in Australia

      Actinolite

      Anthophyllite      

      Tremolite 


      In Australia, mostly chrysotile asbestos was mined until 1939. With the commencement of mining at Wittenoom in Western Australia in 1937, crocidolite dominated production until the final closure of this mine in 1966. New South Wales, the first State to mine asbestos, produced the largest tonnages of chrysotile (until 1983), as well as smaller quantities of amphibole (until 1949).

      Australian asbestos production and exports declined after the closure of the Wittenoom mine, and imports of chrysotile also started to decline. Consumption peaked in about 1975, at 70,000 tonnes/year.

      Australia also imported many manufactured asbestos products, including asbestos cement articles, asbestos yarn, cord and fabric, asbestos joint and millboard, asbestos friction materials and gaskets. The main sources of these products were the United Kingdom, the USA, the Federal Republic of Germany and Japan.

      In Australia, the asbestos cement manufacturing industry was responsible for over 60% of all production and 90% of all consumption of asbestos fibre. From about 1940 to the late 1960s all three types of asbestos were used in this industry. The use of crocidolite was gradually phased out from 1967, but amosite was used until the mid-1980s. Much of this industry output remains in service today in the form of ‘fibro’ houses and water and sewerage piping.

      Between 1945 and 1954, 70,000 asbestos cement houses were built in New South Wales alone (52% of all the houses built in that State). In Australia as a whole, until the 1960s, 25% of all new housing was clad in asbestos cement. By 1954 Australia was number four in the Western world in gross consumption of asbestos cement products, after the USA, the UK and France, and clearly first on a per capita basis.

      When did the national ban on the use of asbestos begin?

      On 17 October 2001, the National Health and Safety Commission (NOHSC) declared a prohibition on all uses of chrysotile from 31 December 2003, subject to a very limited range of exemptions.

      This prohibition also confirmed earlier prohibitions of the use of amosite and crocidolite asbestos.

      Under the National Model Regulations for the Control of Workplace Hazardous Substances the chrysotile asbestos ban prohibits the use (i.e. manufacture, supply, storage, sale, use, re-use, installation and replacement) of chrysotile asbestos except for certain very limited scientific uses.

      The prohibition does not extend to the removal of asbestos products in situ at the time prohibition took effect. These in situ asbestos containing materials (ACM) must be appropriately managed to ensure that the risks of exposure to airborne asbestos fibres are minimised.

      The ultimate goal is for all workplaces to be free of ACM. Where practicable, consideration should be given to the removal of ACM during renovation, refurbishment, and maintenance, rather than other control measures such as enclosure, encapsulation or sealing. Asbestos products which were in situ on 31 December 2003 may only be replaced by products which do not contain asbestos.

      Course run time 60 minutes.

      This course has been reviewed by a subject matter expert.

      It has been designed to comply with best practice national health and safety standards. Terminology has been chosen for clarity and ease of comprehension across jurisdictions. For example, ‘employer’ has been used to signify the broader term ‘PCBU’, while ‘WHS’ represents both work and occupational health and safety.

      This training is not a substitute for professional legal advice. If you require further advice or information, please contact the health and safety regulator in your jurisdiction.

        A Certificate of Completion is issued on successful completion of the course and you are required to get an 80% pass mark to be deemed as understanding the content. It is recommended that training is conducted every 2 years to stay refreshed.

        For more information on Asbestos Awareness Training see AlertForce.

        Run time 60 minutes.

          • Money Back Guarantee
          • Save Time & Money
          • Tax Deductible
          • 1000's Trained Each Month
          • Quality-Focused
          • Peer Reviewed Courses
          • Trusted Industry Partner
          • Fast Certification
          • 60 Day Guarantee
          • *See refund policy

          Got multiple people needing to do a course? We will get back to you within a day!

          Student Reviews

          Regular price $66
          Regular price Sale Sale price $66
          Sale Sold out
          Tax included.

          Asbestos Awareness Training Course Online

          Asbestos Awareness Training Course Online

            “The online course exceeded my expectations. It was convenient, comprehensive, and engaging. The instructors were knowledgeable and supportive. I now feel confident in assisting clients with medications. Highly recommended for healthcare professionals and those interested in medication management.”

            Lucky Y.

            Contact Us!

            Contact form

            First Name
            Last Name
            Email Address
            Phone Number
            Messages

            FREE EXTRA BONUSES with OHS.com.au

            Claim up to $1232 worth of Extra Bonuses
            with every purchase

            • $100 off your first case from Naked Wines (value $100)
            • Upto 100,000 Bonus Qantas Frequent Flyer points* (value $1000)
            • Complimentary Access to two online courses** (value $132)
            $1232 EXTRA VALUE - JUST FOR YOU INSIDE!
            * New customers when you successfully sign up for a new personal / business credit card ** Indigenous Cultural Awareness / Impacts of Climate Change courses

            Description

            This course focuses on highlighting the importance of managing Asbestos in the workplace. Asbestos is a hazardous material that poses a risk to health by inhalation if the asbestos fibres become airborne and people are exposed to these airborne fibres. Exposure to asbestos fibres is known to cause mesothelioma, asbestosis and lung cancer. It is important for employees who may work in buildings that contain asbestos to know where it is likely to be found and how to avoid exposure. 

            Successful completion of this training course, participants will be enabled to:

            - Identify relevant OHS/WHS legislation that applies to asbestos

            - Identify asbestos

            - Identify likely asbestos containing material

            - Know the health effects of exposure to asbestos

            - Establish and maintain safety procedures

            - Identifying when a license Is required when removing asbestos

            - Identifying the requirements for selection and use of relevant PPE

            - Acquire knowledge and understanding of asbestos removal

            - Safety requirements of working with asbestos

            Other Asbestos Training courses available here

            Asbestos-containing materials were used extensively in Australian buildings and structures, plant and equipment and in ships, trains and motor vehicles during the 1950s, 1960s and 1970s, and some uses, including some friction materials and gaskets, were only discontinued on 31 December 2003.

            The well-known adverse health consequences of exposure to airborne asbestos fibres can be prevented if precautions are taken and appropriate procedures are followed. Strong management and control of all asbestos-containing materials (ACM) in the workplace is essential. The risks posed by asbestos vary depending on the nature and condition of the materials and the potential for exposure.

            Do you agree that it is a good idea to reduce the risks associated with asbestos in the workplace? Good, let’s start by looking at when and where asbestos has been used in Australia.

            What are the historical uses of asbestos?

            Asbestos is the fibrous form of mineral silicates belonging to the serpentine and amphibole groups of rock-forming minerals.

            The most common form of asbestos used in Australia is crocidolite (blue asbestos), and chrysotile (white asbestos). Crocidolite and chrysotile account for over 95% of asbestos based materials used in Australia. Other mineral forms of asbestos were not widely used.

            As a naturally occurring mineral fibre, asbestos is mined and then broken down from mineral clumps into groups of loose fibres.

            Asbestos has excellent fire resistance, insulation properties, fibre strength, durability and flexibility. As a result, it was used in more than 3,000 products, including heat-resistant textiles (cloth, padding and board), asbestos cement products (sheets and pipes), special filters for industrial chemicals, thermal insulation products (pipe and boiler insulation), friction materials (clutch plates, brake linings), gaskets, floor tiles, roofing materials, packing materials, paints and protective paper.

            A major historical use was as sprayed thermal insulation on steel beams for fire protection. This sprayed or ‘limpet’ asbestos poses the greatest health risk, because of its highly friable nature.

            Asbestos-containing materials (ACM) may still be encountered throughout public and private buildings and structures, especially those built between the 1950s and the late 1970s to early 1980s. Some uses of ACM continued until 2003, notably in friction materials (brakes) and gaskets.

            What types of asbestos were produced and used in Australia?

            Asbestos is the name applied to six naturally occurring minerals that are mined from the earth. The different types of asbestos are: 

            Commonly used in Australia

            Serpentine

            • Chrysotile 

            Amphibole

            • Amosite
            • Crocidolite

            Not commonly used in Australia

            Actinolite

            Anthophyllite      

            Tremolite 


            In Australia, mostly chrysotile asbestos was mined until 1939. With the commencement of mining at Wittenoom in Western Australia in 1937, crocidolite dominated production until the final closure of this mine in 1966. New South Wales, the first State to mine asbestos, produced the largest tonnages of chrysotile (until 1983), as well as smaller quantities of amphibole (until 1949).

            Australian asbestos production and exports declined after the closure of the Wittenoom mine, and imports of chrysotile also started to decline. Consumption peaked in about 1975, at 70,000 tonnes/year.

            Australia also imported many manufactured asbestos products, including asbestos cement articles, asbestos yarn, cord and fabric, asbestos joint and millboard, asbestos friction materials and gaskets. The main sources of these products were the United Kingdom, the USA, the Federal Republic of Germany and Japan.

            In Australia, the asbestos cement manufacturing industry was responsible for over 60% of all production and 90% of all consumption of asbestos fibre. From about 1940 to the late 1960s all three types of asbestos were used in this industry. The use of crocidolite was gradually phased out from 1967, but amosite was used until the mid-1980s. Much of this industry output remains in service today in the form of ‘fibro’ houses and water and sewerage piping.

            Between 1945 and 1954, 70,000 asbestos cement houses were built in New South Wales alone (52% of all the houses built in that State). In Australia as a whole, until the 1960s, 25% of all new housing was clad in asbestos cement. By 1954 Australia was number four in the Western world in gross consumption of asbestos cement products, after the USA, the UK and France, and clearly first on a per capita basis.

            When did the national ban on the use of asbestos begin?

            On 17 October 2001, the National Health and Safety Commission (NOHSC) declared a prohibition on all uses of chrysotile from 31 December 2003, subject to a very limited range of exemptions.

            This prohibition also confirmed earlier prohibitions of the use of amosite and crocidolite asbestos.

            Under the National Model Regulations for the Control of Workplace Hazardous Substances the chrysotile asbestos ban prohibits the use (i.e. manufacture, supply, storage, sale, use, re-use, installation and replacement) of chrysotile asbestos except for certain very limited scientific uses.

            The prohibition does not extend to the removal of asbestos products in situ at the time prohibition took effect. These in situ asbestos containing materials (ACM) must be appropriately managed to ensure that the risks of exposure to airborne asbestos fibres are minimised.

            The ultimate goal is for all workplaces to be free of ACM. Where practicable, consideration should be given to the removal of ACM during renovation, refurbishment, and maintenance, rather than other control measures such as enclosure, encapsulation or sealing. Asbestos products which were in situ on 31 December 2003 may only be replaced by products which do not contain asbestos.

            Course run time 60 minutes.

            This course has been reviewed by a subject matter expert.

            It has been designed to comply with best practice national health and safety standards. Terminology has been chosen for clarity and ease of comprehension across jurisdictions. For example, ‘employer’ has been used to signify the broader term ‘PCBU’, while ‘WHS’ represents both work and occupational health and safety.

            This training is not a substitute for professional legal advice. If you require further advice or information, please contact the health and safety regulator in your jurisdiction.

              A Certificate of Completion is issued on successful completion of the course and you are required to get an 80% pass mark to be deemed as understanding the content. It is recommended that training is conducted every 2 years to stay refreshed.

              For more information on Asbestos Awareness Training see AlertForce.

              Run time 60 minutes.

                • Money Back Guarantee
                • Save Time & Money
                • Tax Deductible
                • 1000's Trained Each Month
                • Quality-Focused
                • Peer Reviewed Courses
                • Trusted Industry Partner
                • Fast Certification
                • 60 Day Guarantee
                • *See refund policy

                Student Reviews

                Regular price $66
                Regular price Sale Sale price $66
                Sale Sold out
                Tax included.

                Asbestos Awareness Training Course Online

                Asbestos Awareness Training Course Online

                  Course Highlights:

                  • On-demand Training
                  • Complete on Any Device
                  • Quality Focused
                  • Fast Certification
                  • Tax Deductable
                  • 100% Online
                  • 24 Months Unlimited Course Access
                  • Self-print Certificate

                  “The online course exceeded my expectations. It was convenient, comprehensive, and engaging. The instructors were knowledgeable and supportive. I now feel confident in assisting clients with medications. Highly recommended for healthcare professionals and those interested in medication management.”

                  Lucky Y.
                  View full details